Operating Temps: Unfilled 100% Virgin PTFE -110° F to 500° F
Available Materials: Virgin PTFE, Glass Filled PTFE, Carbon Filled PTFE, Bronze Filled PTFE, Moly/Glass Filled PTFE, Modified PTFE (TFM)
Packaging: Bulk or Sets
Tags: PTFE Packing Set, CVH Packing, Highest Profile Design, Heavy Duty Packing, High Pressure Packing Set, Heavy Wall Cross Section, Piston Seal, Shaft Seal
The 1125 series CVH features a robust design with increased wall thickness and cross-sectional area, enabling it to withstand elevated operating pressures. This high-pressure variant of the v-ring design boasts enhanced structural integrity, characterized by its heavy walls and robust construction.
While it may reach its compression limit more quickly, its intended application is higher pressure environments. The profile of this design reduces void volume within each set, leading to a more rabid achievement of solid compression. This results in a seal that exhibits enhanced resistance to wear and tear.
Furthermore, this profile allows for increase adjustability even after removal of the inter-ring voids, facilitating optimal sealing performance. However, it is important to note that his design is less suitable for lower pressure applications, where its robust construction may be less effective.
Heights are infinitely adjustable per customer request, without any need for tooling charges.
Pressure Ranges and Recommended Number of Rings per Packing Set*
| Pressure Range | Female Rings | V-Ring Packing Sets | Male Rings |
|---|---|---|---|
| 0-500 | 1 | 3-4 | 1 |
| 501-2000 | 1 | 4-5 | 1 |
| 2001-5000 | 1 | 5-6 | 1 |
| 5001 and Higher | 1 | 6-7 | 1 |
*Pressure rating and number of rings is dependent on the application and is subject to change.